User Manual Q&AAnswer
Feb 03, 2025 - 05:34 AM
To install the ASUS Prime Z390-A motherboard, follow these steps:
1. Prepare your computer case: Ensure that your computer case is compatible with ATX form factor motherboards. Remove the side panel of the case to access the internal components.
2. Mount the motherboard: Place the motherboard on a flat surface and align it with the standoffs in the case. The standoffs are typically pre-installed in the case and help to secure the motherboard. Make sure that the I/O shield on the back of the case aligns with the motherboard's rear connectors.
3. Secure the motherboard: Use screws to secure the motherboard to the standoffs. Start by loosely screwing in one corner, then diagonally tighten the screws to ensure even pressure. Do not overtighten the screws as it may damage the motherboard.
4. Connect power supply cables: Connect the main 24-pin power connector from the power supply to the corresponding socket on the motherboard. Additionally, connect the 8-pin CPU power connector to the designated socket near the CPU socket.
5. Install CPU and RAM: Refer to the motherboard manual for detailed instructions on installing the CPU and RAM modules. Make sure to align the CPU correctly and secure it in the socket. Insert the RAM modules into the appropriate slots, following the recommended configuration for dual-channel memory.
6. Connect front panel connectors: Connect the front panel connectors (power switch, reset switch, HDD LED, etc.) from the computer case to the corresponding pins on the motherboard. Consult the motherboard manual for the exact pin layout and connector labeling.
7. Install expansion cards: If you have any expansion cards such as graphics cards or sound cards, insert them into the appropriate PCIe slots on the motherboard. Ensure that they are securely seated and fasten them with screws if necessary.
8. Connect storage devices: Connect your storage devices (hard drives, SSDs) to the SATA connectors on the motherboard using SATA cables. If you have an M.2 SSD, refer to the manual for instructions on installing it in the M.2 slot.
9. Connect peripherals: Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports on the motherboard.
10. Double-check connections: Before powering on the system, double-check all connections to ensure they are secure and properly connected.
11. Close the computer case: Once everything is connected and verified, close the computer case by reattaching the side panel.
For more detailed instructions and diagrams, please refer to the ASUS Prime Z390-A motherboard instruction guide provided in the link you provided.
Add New Comment