User Manual Q&AAnswer
Feb 03, 2025 - 05:16 AM
To program the Shenzhen Enzo Technology RMT-TX100U remote control to work with your TV, please follow the steps below:
1. Turn on your TV and make sure it is set to the correct input/source for the remote control programming.
2. Locate the "SETUP" button on the remote control. Press and hold the "SETUP" button until the LED indicator on the remote control lights up.
3. While holding the "SETUP" button, enter the 3-digit code for your TV brand using the number buttons on the remote control. You can find the code for your TV brand in the user manual or by visiting the manufacturer's website.
4. After entering the code, release the "SETUP" button. The LED indicator should turn off.
5. Test the remote control by pressing the power button. If the TV turns off, the programming was successful. If not, repeat steps 2-4 with a different code for your TV brand.
If you are unable to find the correct code for your TV brand or if the programming is not successful, you can try the following alternative methods:
- Auto Code Search: Press and hold the "SETUP" button until the LED indicator lights up. Then, press and release the "TV" button. Next, press and release the "POWER" button repeatedly until the TV turns off. Once the TV turns off, press the "OK" button to save the code.
- Manual Code Search: Press and hold the "SETUP" button until the LED indicator lights up. Then, press and release the "TV" button. Next, press and hold the "CH+" button until the TV turns off. Once the TV turns off, press the "OK" button to save the code.
If none of the above methods work, please consult the user manual or contact the manufacturer's customer support for further assistance.
Add New Comment