User Manual Q&AAnswer
Feb 03, 2025 - 02:45 AM
To connect the TREATLIFE Smart Light Switch to your phone, follow these steps:
1. Download the "Smart Life" app from the App Store or Google Play.
2. Register or log in to the app using your phone number and password.
3. Make sure the switch is connected to electricity and your phone is connected to the Wi-Fi router.
4. Open the app and tap the "+" icon on the top right corner to add a device.
5. Choose "Wall Switch" as the device type.
6. If the switch is in default configuration mode, press and hold the manual switch for 5 seconds until the red indicator light blinks quickly. Tap "Confirm indicator rapidly blink" and enter your Wi-Fi password. Wait for the connection to complete.
7. If the default mode doesn't work, you can try AP mode. Tap "AP Mode" on the top right corner. Press and hold the manual switch for 5 seconds until the red indicator light blinks quickly, then press and hold for 5 seconds again until the indicator light blinks slowly. Tap "Confirm indicator slowly blink" and enter your Wi-Fi password.
8. Open your phone's WLAN settings and connect to "SmartLife-xxxx" network.
9. Go back to the app and continue adding the device. Wait for the connection to complete.
If you encounter any issues during the connection process, refer to the troubleshooting guide in the user manual or contact customer support for assistance.
Add New Comment