User Manual Q&AAnswer
Feb 03, 2025 - 02:42 AM
To replace the battery in the KAIWEETS KM100 Digital Multimeter, follow these steps:
1. Turn off the power supply of the instrument and remove the probes from the instrument.
2. Remove the screws fixing the battery cover and remove the battery cover.
3. Remove the old batteries and replace them with fresh batteries (AAA, 1.5V x 2). Make sure to place the batteries according to the positive and negative polarity marks inside the battery cover.
4. Install the battery cover back to its original position and fix it with the screws.
Note: It is important to replace the battery promptly when the battery power is low to prevent error readings. Do not make the battery short circuit or reverse the battery polarity to discharge the batteries. If the instrument will not be used for an extended period of time, it is recommended to remove the batteries for safe operation and product maintenance.
For more information and visual instructions, refer to the "Replace Battery" section in the KAIWEETS KM100 Digital Multimeter User Guide.
Add New Comment