User Manual Q&AAnswer
Feb 03, 2025 - 01:59 AM
To pair the Parent Unit with the Baby Unit, follow these steps:
1. Make sure both units are turned on and the Baby Unit is connected to the AC adapter.
2. On the Parent Unit, press the Menu/Exit button to access the menu.
3. Use the LEFT or RIGHT button to highlight the Baby Unit icon.
4. Use the UP or DOWN button to select the desired Baby Unit to pair.
5. Press the OK button to start the pairing process.
6. On the back of the Baby Unit, press and hold the "Pair" button until the Parent Unit shows images.
7. If the pairing fails, choose another Baby Unit channel and try to pair again.
8. Once paired successfully, the screen will display the image from the Baby Unit.
Note: If you want to pair more than one Baby Unit with the Parent Unit, follow the same steps and select the additional Baby Units to pair. After connecting with all the Baby Units, press the OK key to view/scan the Baby Units. In Scan Mode, the scan icon will be displayed on the top of the screen.
Add New Comment