User Manual Q&AAnswer
Feb 03, 2025 - 12:29 AM
To set the timer to turn on at dusk and off after a specific number of hours, follow these steps:
1. Press the overload protection switch to the "I" position and turn on all outlets. The indicator on the switch will be lighted.
2. Press the select button on the stake or the timer control button on the transmitter to enter the desired operating mode.
3. Press the select button or the timer button on the transmitter to cycle through the available options until you reach the desired mode: "+2 H/4H/6H/8H" or "Timer +2 H/4H/6H/8H".
4. Once you have selected the desired mode, the power will turn on immediately and then off after the number of hours you have selected.
Note: The timer repeats daily after setting. In case of a power failure, the timer will go back to the off state and need to be reset to the desired operating mode once power is restored.
For more detailed instructions and information, please refer to the "Operating Instructions" section of the instruction manual provided with the product.
Add New Comment