Answer

Feb 02, 2025 - 11:44 PM
To pair the UGREEN HiTune Bluetooth Earbuds with your phone, follow these steps:
1. Ensure that both earbuds are removed from the charging case and that the Bluetooth function on your phone is turned on.
2. The LED indicators on both earbuds will flash blue, indicating that the connection between the left and right earbuds is being established automatically.
3. The LED indicator on the left earbud will start flashing blue and white alternately, while the indicator on the right earbud will turn off. This means that the earbuds are in pairing mode.
4. Open the Bluetooth settings on your phone and select "UGREEN HiTune" from the list of available devices.
5. Once the connection is successful, you will hear a voice prompt of " xxxx " in the left earbud, and both LED indicators will turn off.
Note: If you want to use the earbuds individually in Mono Mode, you can pair the left earbud by searching for "UGREEN HiTune" in the Bluetooth Devices list, and the right earbud by searching for "UGREEN HiTune - R".
If you encounter any issues with the pairing process, make sure that the earbuds are fully charged and that there are no other devices connected to your phone via Bluetooth. You can also try restarting both earbuds and your phone. If the problem persists, refer to the user manual for additional troubleshooting steps.
Add New Comment