User Manual Q&AAnswer
Feb 02, 2025 - 10:22 PM
To pair the Fosmon C-10683 WavePoint Wireless Remote Control with the receiver, please follow these steps:
1. Open the battery cover of the remote and insert 1 CR2032 battery with the positive side facing up.
2. Press the ON/OFF button on the remote to check if the LED indicator turns on. If it does, the remote is functioning properly.
3. Plug the receiver into a 3-prong AC outlet. The receiver's LED indicator will start flashing slowly, indicating that it is in pairing mode.
4. While the LED indicator on the receiver is flashing slowly, press the ON/OFF button on the remote once to pair it with the receiver. Note that the receiver will exit pairing mode after being paired or after 29 seconds.
5. Press the button on the remote to turn on/off your receiver.
If you need to unpair the remote from the receiver, follow these steps:
1. Unplug the receiver from the outlet and plug it back in. The LED indicator on the receiver will start flashing slowly, indicating that it is in pairing mode.
2. Press and hold the button on the remote for 3-4 seconds. You should see the receiver's LED flash quickly for 3-4 seconds. After this, the receiver will return to pairing mode.
3. Unplug the receiver from the outlet.
4. The receiver should now be unpaired from the remote.
Please refer to the user manual for more information and safety precautions.
Add New Comment