User Manual Q&AAnswer
Feb 02, 2025 - 06:05 AM
To install the NETGEAR R8000 Nighthawk X6 AC3200 Tri-Band WiFi Router using the Nighthawk app, follow these steps:
1. Download the Nighthawk app on your mobile phone from the app store.
2. Once downloaded, open the Nighthawk app and follow the setup instructions provided.
3. Make sure your modem is turned off and disconnected.
4. Connect your router to the modem using an Ethernet cable.
5. Turn on your modem and wait for it to fully boot up.
6. Press the power button on the router to turn it on.
7. Open the Nighthawk app and follow the on-screen instructions to complete the installation process.
If you encounter any issues during the installation process, you can try the following troubleshooting steps:
1. Turn off your modem and router, disconnect them, and then reboot your modem.
2. Reconnect your router to the modem and try installing it again using the Nighthawk app.
3. If you're still unable to install the router using the app, you can manually install it using the router web interface. Access the router web interface by visiting http://www.routerlogin.net in your web browser.
For further assistance, you can visit netgear.com/routerhelp or contact NETGEAR support.
Add New Comment