User Manual Q&AAnswer
Feb 02, 2025 - 05:31 AM
To program the LED lights on the PowerA Spectra Infinity Enhanced Wired Controller, follow these steps:
1. Hold the LED button on the back of the controller for 2 seconds to enter LED Program Mode. The light piping around the top housing of the controller will blink, indicating that you're in LED Program Mode.
2. The controller has three separate light-up Spectra Zones. To toggle through the three zones, press "Right" on the D-Pad. Note that Zone One is the default starting zone.
3. Select one of the A/B/X/Y buttons to choose your color. You can choose from 5 shades of green, red, blue, or yellow.
4. Press the selected A/B/X/Y button to toggle through 5 shades of the chosen color.
5. Press "Left" on the D-Pad to program the zone's light effect. You can choose between "breathing" or solid.
6. Use the "UP" and "DOWN" buttons on the D-Pad to select one of ten brightness levels.
7. To exit Program Mode, hold the LED button for 2 seconds. All three LED Zones will flash three times to indicate that you're out of LED Program Mode.
To quickly turn off the LEDs completely, press the LED Program Button once. Press it again to turn the Spectra lighting feature back on.
For more information and visual instructions, refer to the PowerA Spectra Infinity Enhanced Wired Controller User Manual.
Add New Comment