User Manual Q&AAnswer
Feb 02, 2025 - 05:06 AM
To turn on the Diffuserlove 2368 Essential Oil Diffuser and adjust the mist level, please follow these steps:
1. Rotate the oil diffuser to the right and pull it vertically upwards to remove the cover from the water tank.
2. Connect the AC adapter power wire to the DC input jack on the water tank's bottom.
3. Fill the water tank with water and essential oils. Make sure not to exceed the "MAX" 200ml line inside the tank. Do not fill the tank when the electricity is on.
4. For each 100ml of water, add 2-3 drops of essential oil.
5. Re-secure the water tank cover to the tank. The spout may be adjusted to direct the perfume in the appropriate direction. Operate the diffuser only with the cover on.
6. Insert the AC adapter into the wall outlet.
7. Press the "MIST" button to turn on the diffuser. Press it again to specify the appropriate operation time. You can change the mist level by firmly pushing the "MIST" button until the diffuser beeps (one beep for high and two beeps for low). Press "MIST" during the subsequent cycle until the switch is off to turn it off.
Please refer to the Diffuserlove 2368 Essential Oil Diffusers User Manual for more detailed instructions and safety precautions.
Add New Comment