User Manual Q&AAnswer
Feb 02, 2025 - 04:06 AM
To install the Luposwiten LP-SL-28D Solar Outdoor Lights, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Choose the installation location: Select a suitable location on a wall or any other surface where you want to mount the solar lights. Make sure it receives ample sunlight during the day.
2. Mark the drilling holes: Hold the solar light against the wall and mark the positions of the two xxxx holes with a pencil or marker.
3. Drill the holes: Use a drill to create holes at the marked positions. Make sure the holes are deep enough to securely hold the screws.
4. Attach the solar light: Align the holes on the back of the solar light with the drilled holes on the wall. Insert the screws through the holes and tighten them with a screwdriver until the light is securely attached.
5. Test the light: After installation, switch the light to the "ON" position. The solar light will automatically charge during the day and turn on at night when motion is detected.
Please refer to the user manual for any additional instructions or troubleshooting tips.
Add New Comment