How do I connect the front I/O cables of the omiXimo GT1030 Delta RGB Mid Tower Case? (omiXimo GT1030 RGB Mid-Tower Case User Manual)

Answer

manuals.plus

Feb 01, 2025 - 05:56 AM

To connect the front I/O cables of the omiXimo GT1030 Delta RGB Mid Tower Case, please refer to the motherboard's manual for detailed instructions. The front I/O connectors on the case need to be connected to the corresponding pins on the motherboard. The motherboard's manual will provide you with the specific pin layout and instructions on where to connect each cable.

Here is a general guide on how to connect the front I/O cables:

1. Power Switch: Connect the power switch cable from the case to the power switch pins on the motherboard. This allows you to turn the computer on and off.

2. Reset Switch: Connect the reset switch cable from the case to the reset switch pins on the motherboard. This allows you to reset the computer.

3. Power LED: Connect the power LED cable from the case to the power LED pins on the motherboard. This indicates the power status of the computer.

4. HDD LED: Connect the HDD LED cable from the case to the HDD LED pins on the motherboard. This indicates the activity of the hard drive.

5. USB Ports: Connect the USB port cables from the case to the USB headers on the motherboard. This allows you to use the USB ports on the front of the case.

Please note that the specific pin layout and connector types may vary depending on the motherboard model. It is important to consult the motherboard's manual for accurate instructions.

For further assistance, please refer to the omiXimo GT1030 Delta RGB Mid Tower Case user manual, which should provide detailed diagrams and instructions specific to your case model.