User Manual Q&AAnswer
Feb 01, 2025 - 05:48 AM
To connect the Modular E70 series piezo controller to your computer for control, you can use either the USB interface or the RS-232/422 interface socket. Here are the steps to follow:
1. If you are using the USB interface:
a. Connect one end of the USB cable to the USB interface on the Modular E70 controller.
b. Connect the other end of the USB cable to an available USB port on your computer.
2. If you are using the RS-232/422 interface:
a. Connect one end of the RS-232/422 cable to the RS-232/422 interface socket on the Modular E70 controller.
b. Connect the other end of the RS-232/422 cable to the corresponding port on your computer. Note that you may need a RS-232/422 to USB adapter if your computer does not have a RS-232/422 port.
Once the connection is established, you can use the provided software or analog input control to control the Modular E70 series piezo controller from your computer.
Please refer to the user manual for more detailed instructions and information on the software control and analog input control options.
Add New Comment