User Manual Q&AAnswer
Feb 01, 2025 - 05:45 AM
To pair the TOPWAY em 21YX48BK Rugged Speaker with your audio source, please follow these steps:
1. Power on the speaker by pressing and holding the power button for 2 seconds until you hear the "power on" prompt voice.
2. Once the speaker is powered on, the blue LED will come on and blink, indicating that it is in pairing mode.
3. Make sure Bluetooth is enabled on your audio source (e.g., smartphone, tablet, etc.).
4. In a few moments, you will see the pairing name "WIRELESS SPEAKER" appear on your Bluetooth device list.
5. Select the "WIRELESS SPEAKER" pairing name on your audio source to connect to the speaker.
6. Once connected, the LED on the speaker will flash blue every 5 seconds, indicating a successful pairing.
Note: After the initial pairing, the speaker will automatically search for and reconnect to the last Bluetooth device it was paired with.
If you encounter any issues during the pairing process, make sure the speaker is in pairing mode (blue light blinking), delete the pairing list on your audio source, and try again. If the problem persists, you can also try restarting both your audio source and the Rugged Speaker.
For more detailed instructions and information, please refer to the TOPWAY em 21YX48BK Rugged Speaker User Guide provided with the product.
Add New Comment