User Manual Q&AAnswer
Feb 01, 2025 - 05:36 AM
To assemble the ATGAMES HA8818 Legends Pinball Micro Multiple IP Skin Artwork, please follow these steps:
Step 1: Use the included Philips head screwdriver to open up the back panel on the Backglass.
Step 2: Insert [S2] Dowels into the matching hole on top of the Playfield.
Step 3: Feed the video and audio cables through the hole on the back of the Backglass, and attach the Backglass to the top of the Playfield using the dowels.
Step 4: Insert 2 [S1] screws into the matching holes and tighten them.
Step 5: Connect the video and audio cables to the matching slots.
Step 6: Attach the back cover of the Backglass and tighten it with the included Philips head screwdriver.
Please refer to the assembly guide in the product manual for visual instructions and additional details.
Note: It is important to exercise caution when moving the cabinet body and backglass to avoid damage to the components. Do not carry the cabinet body by grabbing the opening on the backglass, as this can cause serious damage to both the body and electronics inside.
Add New Comment