User Manual Q&AAnswer
Feb 01, 2025 - 05:33 AM
To connect the ArduCAM B0395 camera module to your Raspberry Pi, follow these steps:
1. Locate the camera port near the USB C power connector on your Raspberry Pi.
2. Gently pull up on the plastic edge of the camera port.
3. Insert the camera ribbon into the camera MIPl port on the Raspberry Pi, ensuring that the silver connector is facing the Raspberry Pi.
4. Make sure not to bend the flex cable and ensure it is firmly inserted.
5. Push the plastic connector down while holding the flex cable until the connector is back in place.
Note: For night vision functionality, an infrared LED is required to provide infrared lighting.
For more detailed information and visual instructions, please refer to the "CONNECT THE CAMERA" section in the ArduCAM B0395 user manual.
(Source: ArduCAM B0395 8MP IMX219 NOIR V2 Night Vision camera module Camera User Manual)
Add New Comment