User Manual Q&AAnswer
Feb 01, 2025 - 05:32 AM
To connect the E51.D7S Piezo Controller to a computer or other device, you will need to use the RS-422 interface. Here are the steps to follow:
1. Make sure the power supply is disconnected before making any connections.
2. Connect one end of the RS-422 cable to the RS-422 port on the E51.D7S controller.
3. Connect the other end of the RS-422 cable to the RS-422 interface on your computer or other device.
4. Ensure that the cable is securely connected on both ends.
5. Once the connections are made, you can use the RS-422 interface to control the E51.D7S Piezo Controller.
Please refer to the "Cable Connection" section in the user manual for more detailed information and pin definitions of the RS-422 interface.
Note: It is important to follow the instructions in the manual and ensure that the power is disconnected before making any connections to avoid any potential hazards.
Add New Comment