User Manual Q&AAnswer
Feb 01, 2025 - 05:31 AM
To connect and power the COREMORROW E63.A1K Series Piezo Controller, follow these steps:
1. Connect the power supply: Use a +15VDC/0.5A power supply and connect it to Pin 1 of the controller.
2. Ground connection: Connect the supply voltage ground and control input ground (AGND) to Pin 2 of the controller.
3. Analog voltage input: Connect the analog voltage input to Pin 3 of the controller.
4. Voltage output ground: Connect the voltage output ground (SGND output) to Pin 4 of the controller.
5. Analog voltage output: Connect the analog voltage output to Pin 5 of the controller.
Please refer to the Pin Definition section in the user manual for a visual representation of the pin connections.
Note: Make sure not to touch any exposed ends of the product or its accessories. Do not open the case without permission. Also, avoid connecting or disconnecting cables while the power is on. Keep the controller clean and dry, operating in a non-humid and non-static environment. Before turning off the controller switch, clear the output voltage to zero.
For further assistance or technical support, please contact Harbin Core Tomorrow Science & Technology Co., Ltd. using the provided contact information in the user manual.
Add New Comment