User Manual Q&AAnswer
Feb 01, 2025 - 05:28 AM
To connect the eMOTUS5P Powered Loudspeakers Stereo kit to your audio source, follow these steps:
1. Identify the audio input options on the MASTER (L) unit. It has a Euroblock balanced stereo input and a non-balanced RCA input.
2. Choose the appropriate audio input option based on your audio source. If your audio source has balanced outputs, use the Euroblock balanced stereo input. If your audio source has RCA outputs, use the non-balanced RCA input.
3. For the Euroblock balanced stereo input, use a Euroblock connector to connect the audio source to the MASTER unit. Ensure correct polarity in the Euroblock terminals.
4. For the non-balanced RCA input, use RCA connectors to connect the audio source to the MASTER unit.
5. Once the audio source is connected to the MASTER unit, turn on the MASTER unit using the switch on the rear panel.
6. Adjust the volume and equalizer settings on the MASTER unit to the desired levels.
Note: If you have the eMOTUS5PB model, it also has a wireless BT stereo input. To use the wireless connection, press the BT key on the remote control or the rotating volume encoder to select the wireless connection mode. Pair the eMOTUS5PB with your Bluetooth-enabled device and it will act as a receiver/reproducer of the audio emitted by the device.
Please refer to the user manual for more detailed instructions and illustrations on connecting the eMOTUS5P Powered Loudspeakers Stereo kit to your audio source.
Add New Comment