User Manual Q&AAnswer
Feb 01, 2025 - 05:25 AM
To set up the Snap Attack Football Machine as a centering machine, follow these steps:
1. If the machine is attached to the stand, tip the machine up and over onto its feet.
2. Unsocket the three legs and remove both knobs. Store the knobs on the same bolts.
3. Remove the machine from the stand.
4. Open the rear leg support latch and insert the rear leg support. Close the latch over the rear leg and tighten it with the wing nut.
5. Tip the machine back onto the rear leg.
6. Point the machine in the desired direction.
7. Adjust the angle by using your left hand to grab the passing handle and your right hand to depress and adjust it into one of the ten positions.
8. Turn the machine on and turn the wheel speed control xxxx to the approximate speed.
9. Set the ball carefully into the ball cradle and feed the ball into the throwing wheels. Make sure not to jam the cradle and ball into the machine.
10. Adjust the elevation and wheel speed until you achieve the desired spin.
For more detailed instructions and illustrations, please refer to the "SET-UP & PREPARATION" section of the Snap Attack Football Machine Instruction Manual.
Add New Comment