User Manual Q&AAnswer
Feb 01, 2025 - 05:21 AM
To install or replace the batteries in the CONDTROL ULR Receiver, follow these steps:
1. Use a screwdriver to loosen the xxxx of the battery cover located on the receiver.
2. Remove the battery cover.
3. Install the batteries, making sure to observe the correct polarity.
4. Replace the battery cover and use a screwdriver to tighten the xxxx .
5. It is important to use alkaline batteries only.
6. Both batteries must be of the same brand and have the same charge level.
Please refer to the "INSTALL/REPLACE BATTERIES" section in the user manual for more detailed instructions and illustrations.
Add New Comment