User Manual Q&AAnswer
Feb 01, 2025 - 05:18 AM
To connect the SV7-IP Servo Drive with EtherNet IP to your network or PC, please follow these steps:
1. Download and install the QuickTuner™ software from the Applied Motion Products website.
2. Launch the QuickTuner™ software by clicking Start/Programs/Applied Motion Products/Quick Tuner.
3. Connect the SV7-IP drive to your network or PC using a standard CAT5 network cable.
4. On the SV7-IP drive, select an appropriate IP address using the rotary switch. For more information on network configurations and IP address settings, please refer to the SV7 Hardware Manual.
5. Once the above steps are completed, you can proceed with the wiring and power connection of the drive as mentioned in the installation instructions.
Please note that for more detailed information and step-by-step instructions, it is recommended to download and read the SV7 Hardware Manual available on the Applied Motion Products website.
Add New Comment