User Manual Q&AAnswer
Feb 01, 2025 - 04:58 AM
To install the iReSt G600-8 Massage Chair, follow these steps:
1. Select a concrete, wood, or chinaware platform with an area of more than 40cm*36cm.
2. Drill four holes on each corner of the platform with a diameter of 7.8mm.
3. Lock the massage chair onto the platform.
4. Connect the black pipe to the black pipe and the white pipe to the white pipe.
For more detailed instructions and illustrations, please refer to the "Massage System Installation" section in the instruction manual.
Add New Comment