User Manual Q&AAnswer
Feb 01, 2025 - 04:51 AM
Sure! Here are the installation steps for the MULTIBRACKETS 4271 M VESA Gas Lift Arm Basic Single Pole:
1. Before starting the installation, always check the depth of the holes where you plan to mount the arm.
2. Determine the suitable screws for your wall, ceiling, or floor. If the included screws are not suitable, replace them with appropriate ones.
3. Decide on the installation method: desk clamp or through-desk installation.
a. For desk clamp installation:
- Place the desk clamp on the desired location on your desk.
- Tighten the screws on the desk clamp to secure it in place.
b. For through-desk installation:
- Drill a hole on your desk at the desired location.
- Insert the through-desk installation part into the hole.
- Secure the through-desk installation part with the provided screws.
4. Attach the gas lift arm to the installed desk clamp or through-desk installation part.
5. Adjust the arm to your desired height and position.
Please note that this answer is based on the information provided in the manual for the MULTIBRACKETS 4271 M VESA Gas Lift Arm Basic Single Pole. For detailed and accurate installation instructions, it is recommended to refer to the manual itself.
Add New Comment