User Manual Q&AAnswer
Feb 01, 2025 - 04:49 AM
To properly install and mount the load on the COREMORROW S51.ZT1S/K-C1 Piezo Z/Tip/Tilt Platform, please follow these steps:
1. Ensure that the load quality is less than the maximum load capacity of the platform.
2. Mount the load in the center of the moving surface for optimal balance.
3. Use M6 screws to secure the load to the platform, ensuring proper tightening.
4. Avoid mounting the load on one side of the moving platform, as this can cause damage.
5. Do not use excessively long or short screws during the fastening and connecting process. Use the recommended size to ensure proper installation and prevent damage to the product.
It is important to note that for the protection of the product, it is not recommended to use a load that is too high. If a high load must be used, please ensure that the position of the center of gravity of the load is appropriately low. Mounting the load incorrectly or using improper screws can result in damage to the product and affect its motion accuracy.
For more detailed instructions and illustrations, please refer to the "Installation and Precautions" section of the COREMORROW S51.ZT1S/K-C1 Piezo Z/Tip/Tilt Platform User Manual.
Add New Comment