User Manual Q&AAnswer
Feb 01, 2025 - 04:38 AM
To adjust the motion sensor settings on the HOFTRONIC BK02 LED Floodlight Sensor, follow these steps:
1. Delay time: This setting determines how long the lamp stays on after detecting movement. It can be adjusted from 10 seconds to 2 minutes. To change the delay time, locate the corresponding dial on the sensor and turn it to the desired setting.
2. Detection speed of movement: This setting allows you to adjust the minimum movement speed required for the lamp to switch on. The speed can be set between 0.6 and 1.5 meters per second. Locate the dial for detection speed on the sensor and adjust it to your preference.
3. Ambient light: This setting controls when the floodlight turns on based on the ambient light level. It can be set between 3 and 2000 Lux. Higher Lux values make the floodlight less sensitive to ambient light. Adjust the ambient light setting by finding the corresponding dial on the sensor and setting it to the desired Lux value.
Remember to refer to the provided manual for any additional details or specific instructions related to adjusting the motion sensor settings.
Add New Comment