User Manual Q&AAnswer
Feb 01, 2025 - 04:13 AM
To connect the VOLFVERT 12V 3000, 4000W Pure Sine Wave Power Inverter to your battery, follow these steps:
1. Make sure the inverter is in the OFF position and disconnect all AC and DC connections before starting.
2. Locate the Negative (-) and Positive (+) terminals on the inverter's DC side. The Negative terminal is marked in black, and the Positive terminal is marked in red.
3. Connect the Negative terminal of the inverter to the Negative terminal of your battery using the provided Inverter Cable. Ensure a secure and tight connection.
4. Connect the Positive terminal of the inverter to the Positive terminal of your battery using the provided Inverter Cable. Again, ensure a secure and tight connection.
5. Once the connections are made, you can turn on the inverter using the ON/OFF/REMOTE switch. The indicator will light up red when the switch is pressed.
Please note that it is essential to follow the correct polarity when connecting the battery terminals. Incorrect polarity may cause permanent damage to the inverter. Also, make sure to read and comply with all safety instructions and guidelines provided in the user manual to ensure safe and proper operation of the inverter.
Add New Comment