User Manual Q&AAnswer
Feb 01, 2025 - 04:06 AM
To install the HOFTRONIC 5446429 Finn LED Recessed Downlight, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Safety Precautions:
- Ensure that the AC/Mains power is NOT connected during installation.
- This product must be installed by a qualified electrician in compliance with recognized electrical and safety regulations.
- Minors or people with a mental disability should not install this product.
- Install the downlight according to the current edition of the IEE wiring regulations and relevant building regulations in your country.
- Do not cover the downlight with insulation material unless using a model with an insulation guard.
- Check that the total load of the circuit does not exceed the rating of the circuit table, fuse, or circuit breaker.
- Maintain a free airflow of 50mm above and around the downlight.
- Do not install the downlight within 50mm of any joints.
2. Mounting:
- Read the manual before mounting the downlight.
- Mounting should be performed by an appropriately qualified person.
- Make sure to disconnect the power supply before any mounting activities.
- Ensure proper mechanical fastening and connection to electrical power before first use.
- The downlight can be connected to a supply network that meets energy quality standards.
- Select the right diameter of the power cable for the cable gland used in the product to maintain the proper IP protection level.
3. Intended Use/Application:
- The product is designed for household use and similar general applications.
4. Functional Characteristics:
- The product can be used indoors and outdoors.
5. Usage Guidelines/Maintenance:
- Perform maintenance work only when the power supply is cut off and the product has cooled down.
- Clean the downlight with soft and dry cloths, avoiding the use of chemical detergents.
- Do not cover the product and ensure free air access.
- The product may heat up to a higher temperature.
- Use the product only with the rated voltage or voltage within the provided range.
- Do not use the product with a damaged protective cover.
- Avoid using the product in unfavorable conditions such as dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes.
- The product is non-demountable and not suitable for independent repairs.
Please refer to the user manual for any additional information or specific instructions.
Add New Comment