User Manual Q&AAnswer
Feb 01, 2025 - 04:01 AM
To attach an accessory, follow these steps:
1. For the 1/4" Hex Impact Driver (Cat. No. 2757-20), press the shank of the accessory into the hex drive chuck.
2. For the Square Drive Impact Wrenches (Cat. No. 2758-20, 2759B-20), use only the appropriate size Square Drive Sockets. Align the accessory with the anvil and push it firmly over the retaining ring.
3. For the Square Drive Impact Wrench with Pin Detent (Cat. No. 2759-20), use only the appropriate size Square Drive Sockets. Align the hole in the accessory with the detent pin on the anvil. Hold the detent pin in while pushing the socket onto the anvil. The detent pin will snap into place in the hole to secure the socket.
To remove an accessory, follow these steps:
1. For the 1/4" Hex Impact Driver (Cat. No. 2757-20), pull out the ring and remove the accessory. Release the ring.
2. For the Square Drive Impact Wrenches (Cat. No. 2758-20, 2759B-20), pull the accessory off the anvil.
3. For the Square Drive Impact Wrench with Pin Detent (Cat. No. 2759-20), insert a nail or other thin object into the hole in the accessory and press in the detent pin. Pull the accessory off the anvil.
Make sure to use only accessories specifically designed for use on impact wrenches and drivers. Using other sockets and accessories may be hazardous.
Add New Comment