User Manual Q&AAnswer
Feb 01, 2025 - 03:49 AM
The connection terminals for models IC6 and IC8 are of the pressure clamp type for bare cable. Once connected, just select the mode and working power of the unit with a simple screwdriver. Always respect the polarity.
In the IC3 model, the connection terminals are xxxx -type terminal blocks. Connect the cables between the "0" and "8 / 10W" terminals (negative and positive, respectively) if your amplifier is of low impedance. If your amplifier is of high impedance, connect the cables between the "COM" terminals and "6W or 3W or 1.5W @ 100V" (negative and positive, respectively), thus directly selecting a working power for the IC3 unit.
Please refer to the user manual for more detailed instructions and illustrations on how to make the connections properly.
Add New Comment