User Manual Q&AAnswer
Feb 01, 2025 - 03:47 AM
To remove the factory fitted feet assembly, follow these steps:
1. It is recommended to remove the canopy assembly and associated hot plate surrounds to avoid damage. Carefully lower the stove onto its rear, taking care not to damage the rear air box and heat shield cover. Lower the stove onto the base packing pallet it was delivered upon.
2. If the direct air cover has been fitted, remove it by following the next steps. Remove the wheeled castors and the 4x fixings indicated in the manual. The direct air cover can then be withdrawn. Retain the castors and fixings for later use.
3. With the stove safely resting on its back, remove the 7x dome nuts as indicated in the manual.
Once the factory fitted feet assembly is removed, you can proceed with fitting the optional log store or pedestal stand according to the provided instructions.
Add New Comment