User Manual Q&AAnswer
Feb 01, 2025 - 03:46 AM
To connect the SV7-S/Q servo motor driver to your computer, you will need to follow these steps:
1. For RS-232 drives:
a) Connect the drive to your PC using the supplied programming cable. If your PC does not have a serial port, you will need a USB to serial port (RS-232) adapter.
b) Launch the Quick Tuner software by clicking Start / Programs / Applied Motion Products / Quick Tuner.
2. For Ethernet drives:
a) Connect the drive to your network or PC using a standard CAT5 cable.
b) Select an appropriate IP address using the rotary switch on the drive. For more information about network configurations and IP addresses, please consult the SV7 Hardware Manual.
Please note that the specific steps for connecting the SV7-S/Q servo motor driver to your computer may vary depending on the type of drive you have. It is recommended to refer to the SV7 Hardware Manual for detailed instructions and illustrations.
Source: Applied Motion Products SV7-S/Q Servo Motor Driver User Guide
Add New Comment