User Manual Q&AAnswer
Feb 01, 2025 - 03:40 AM
To pair the remote control with the LED driver, follow these steps:
1. Disconnect the power of the LED driver.
2. Press and hold the SET button on the remote control.
3. Connect power to the LED driver.
4. Release the SET button on the remote control as soon as the lights flicker.
5. Press the Mode button on the remote control four times repeatedly.
After following these steps, the remote control should be paired with the LED driver and ready for use.
Please note that this information is based on the provided user manual for the HOFTRONIC Navara LED Porch Dimmable Lights. For more detailed instructions or troubleshooting, refer to the manual or contact the distributor for assistance.
Add New Comment