User Manual Q&AAnswer
Feb 01, 2025 - 03:38 AM
To connect the remote control to the HOFTRONIC 5422317 12V Dimmable Driver, follow these steps:
1. Turn on the power to the driver by either switching on the wall switch or plugging in the power cord to the mains power.
2. Within 5 seconds of turning on the power, press either the Z1 or Z2 button on the remote control.
3. After pressing the button, you should see the spotlights connected to the driver flash once, indicating that the remote control has been successfully connected.
If the remote control is not connected successfully on the first attempt, please pay attention to the following:
- Make sure to press and hold the Z1 or Z2 button for a full 5 seconds. Do not click the button multiple times.
- Ensure that the red light on the remote control is illuminated while you are pressing and holding the Z1 or Z2 button.
- The spotlights should flash once to indicate a successful connection between the driver and the remote control.
For more detailed information and illustrations, please refer to the installation manual provided with the HOFTRONIC 5422317 12V Dimmable Driver. You can also visit the official website at www.hoftronic.com for additional support and resources.
Add New Comment