How do I wire the Applied Motion Products STM23/24 Integrated Steppers to the DC power source? (Applied Motion STM23/24 Integrated Steppers User Guide)

Answer

manuals.plus

Feb 01, 2025 - 03:34 AM

To wire the Applied Motion Products STM23/24 Integrated Steppers to the DC power source, follow these steps:

Step 1: Gather the required equipment, including a small flat blade screwdriver (included), a personal computer running Microsoft Windows 98, 2000, ME, NT, XP, Vista or 7/8/10/11, ST Configurator™ software (available at www.applied-motion.com/products/software), and the appropriate programming cable or adapter for your PC.

Step 2: Before applying power, make sure all connections to the drive have been made. The STM23 and STM24 accept DC voltages from 12-70V. If using an external fuse, it is recommended to use a 3AG, 4 amp fuse for STM23 and a 3AG, 5 amp fuse for STM24. Refer to the product hardware manual for more information on power supply and fuse selection.

Step 3: Download and install the ST Configurator™ software from the Applied Motion Products website. Launch the software and select the correct COM port from the drop-down list. Connect the drive to your PC using the RS-232 programming cable or RS-422/485 adapter.

Step 4: Apply power to the drive. The drive model and firmware revision should be automatically displayed. If not, check the COM port setting.

Step 5: Follow the configuration instructions in the ST Configurator™ help screens. The software allows you to set up your drive to operate in various modes, such as Pulse & Direction, Analog Velocity, and SCL. The ST Configurator™ also includes a self-test option under the Drive menu to verify correct wiring and configuration of the STM and power supply.

For more detailed information and step-by-step instructions, please refer to the STM23 Hardware Manual or STM24 Hardware Manual available at www.applied-motion.com/support/manuals.

If you have any further questions or need assistance, you can contact Applied Motion Products Customer Support at (800) 525-1609 or visit their website at applied-motion.com.