User Manual Q&AAnswer
Feb 01, 2025 - 03:32 AM
To connect the Rayrun TT40 LED controller to your LED lights, follow these steps:
1. Power supply input: Connect the positive power cable to the cable marked with '+' and the negative power cable to the cable marked with '-'. The controller accepts DC power from 12V to 24V. Make sure the LED rated voltage is the same as the power supply.
2. LED output: Connect the LED to the black cable, and the R, G, B, W cables to the relevant color. Ensure that the LED rated voltage is the same as the power supply, and the maximum load current is below the controller's rated current.
Note: Be careful not to short circuit the output cables, as it can permanently damage the controller. Insulate the cables properly to prevent any short circuits.
For more detailed information and illustrations, please refer to the "Wiring diagram" section in the Rayrun TT40 Smart and Remote Control RGB+W LED Controller User Manual.
Add New Comment