User Manual Q&AAnswer
Feb 01, 2025 - 03:29 AM
To connect the Rayrun NT20 LED controller to your smart phone using the Tuya smart app, please follow these steps:
1. Make sure the controller is at factory default mode and not connected to any other gateway or router. The controller indicator should be yellow in color.
2. Install the Tuya app on your smart phone and create an account if you don't have one already.
3. Open the Tuya app and click on the "+" icon to add a new device.
4. Select "Lighting" as the device type and choose "LED Controller" from the list.
5. Follow the on-screen instructions to connect the controller to your Wi-Fi network. Make sure your phone is connected to the same Wi-Fi network.
6. The app will search for available devices. When the Rayrun NT20 LED controller is found, select it and follow the prompts to complete the setup process.
7. Once the controller is successfully connected to the Tuya app, you can control the LED brightness, color temperature, and scenes directly from your smart phone.
Note: If you encounter any issues during the setup process, refer to the user manual for troubleshooting tips or contact the manufacturer's customer support for further assistance.
Add New Comment