User Manual Q&AAnswer
Feb 01, 2025 - 03:25 AM
To connect the Immax Neo 07736L LITE Smart Christmas lights to the Smart Life app, you can follow the steps outlined in the user manual:
1. Make sure your mobile device and the smart lights are connected to the same Wi-Fi network.
2. Reset the LED chain by long-pressing the L button on the controller for more than 10 seconds. The Wi-Fi LED on the controller will flash red quickly.
3. Open the Smart Life app on your mobile device and tap "Register" to create an account using your phone number or email.
4. Sign in to the Smart Life app.
5. In the app, find the "+" button in the corresponding room to add devices.
6. If your mobile device has already turned on Bluetooth before connecting the LED strip, the app will automatically connect to the LED strip. If not, the app will prompt you to turn on Bluetooth. Choose "Allow" to turn on Bluetooth.
7. The app will display information about the LED strip. Choose "Go to add" to proceed.
8. In the next interface, enter your Wi-Fi password and choose "Confirm".
9. The app will enter the status of "Connecting..." and your mobile device will pair with the controller. Wait for the pairing process to complete.
10. When it shows "Added successfully", choose "Done" to finish the setup process.
If the above steps do not work for your devices, you can refer to the alternative solution provided in the user manual, which involves adding the LED strip manually through the app.
Please note that these instructions are based on the information provided in the user manual for the Immax Neo 07736L LITE Smart Christmas lights. For further assistance or troubleshooting, it is recommended to consult the user manual or contact the manufacturer's customer support.
Add New Comment