User Manual Q&AAnswer
Feb 01, 2025 - 03:17 AM
To install the Here4Gear H31 Smart Lock, follow these steps:
1. Turn the handle: Adjust the handle according to the direction you open the door.
For Front Panel:
- Loose four screws.
- Left open the handle toward the left or right open the handle toward the right.
- Reinstall the screws after adjusting.
For Back Panel:
- Loose four screws.
- Left open the handle toward the left or right open the handle toward the right.
- Reinstall the screws after adjusting.
2. Install Mortise: Install the mortise according to the installation diagram provided in the manual.
3. Install Sliding xxxx Casing: The xxxx casing place is adjustable from 55mm to 100mm far from the square shaft. Keep the arrow direction always upward.
4. Connect Front and Back Panels.
5. Install the Battery.
For more detailed instructions and diagrams, please refer to the "Installation" section in the user manual.
Note: It is recommended to read the manual carefully before installation and keep it for future reference.
Add New Comment