How do I connect the front I/O cables of the AeroCool GTX 1650 Delta RGB Mid Tower Case? (AeroCool GTX 1650 Delta RGB Mid Tower Case User Manual)

Answer

manuals.plus

Feb 01, 2025 - 03:16 AM

To connect the front I/O cables of the AeroCool GTX 1650 Delta RGB Mid Tower Case, please follow these steps:

1. Refer to your motherboard's manual for specific instructions on connecting the front I/O cables. The motherboard's manual will provide the necessary information on the pin layout and connector types.

2. Locate the front I/O connectors on the AeroCool GTX 1650 Delta RGB Mid Tower Case. These connectors are usually found on the front panel of the case.

3. Identify the individual cables for the front I/O connectors. These cables typically include USB ports, audio jacks, power button, reset button, and LED indicators.

4. Match the connectors on the front I/O cables with the corresponding pins on the motherboard. The pins on the motherboard are usually labeled with abbreviations such as "PWR_SW" for the power button, "RESET_SW" for the reset button, "HD_AUDIO" for the audio jacks, and so on.

5. Carefully insert each front I/O cable connector onto its corresponding pin on the motherboard. Ensure that the connectors are properly aligned and securely attached.

6. Once all the front I/O cables are connected, you can proceed with the installation of other components such as the motherboard, PSU, add-on cards, storage drives, fans, and radiators, following the instructions provided in the AeroCool GTX 1650 Delta RGB Mid Tower Case user manual.

Note: The specifications of the case may vary depending on your region. For more detailed information or specific instructions, it is recommended to contact your local retailer or refer to the official AeroCool website at aerocool.io.