User Manual Q&AAnswer
Feb 01, 2025 - 03:14 AM
To pair the Thunderstone TSL42 wireless microphone with the receiver, follow these steps:
1. Turn off the microphone.
2. Long-press the power button on the microphone for over 7 seconds until you see the LED lighting rotates. This indicates that the microphone is in pairing mode.
3. Keep the microphone close to the receiver within 0.5m, with no obstructions between them.
4. Talk into the microphone until you can hear your voice from the car speakers.
5. Release the power button on the microphone.
6. Short-press the power button on the microphone to exit the pairing process.
Note: The microphone is already paired with the receiver when it is shipped. You only need to pair them manually if the automatic connection fails or if there is interference from another signal. When the pairing is successful, the LED ring on the microphone will rotate continuously until you exit the pairing process by short-pressing the power button.
Please refer to the Thunderstone TSL42 Wireless Microphone User Manual for more detailed instructions and illustrations.
Add New Comment