How do I connect the Nayax cashless payment system to the CASH-Interface2? (casino CASH-Interface2 Nayax Connection User Manual)

Answer

manuals.plus

Feb 01, 2025 - 03:11 AM

To connect the Nayax cashless payment system to the CASH-Interface2, you will need to follow the wiring instructions provided in the user manual. The specific connections will depend on the Nayax device you are using. Here are the general steps:

1. Determine the Nayax device setup: The Nayax device must operate with a PULSE interface. All Nayax device setup is done in the Nayax web interface. If you purchased the Nayax device from us, we will set it up for your needs.

2. Connect the Nayax device to the CASH-Interface2:
- For Nayax AMIT 3:
- Connect the AC/DC IN "+" (Brown) wire to the CASH-Interface2 +12V DC.
- Connect the AC/DC IN "-" (Green) wire to the CASH-Interface2 GND.
- Connect the PULSE1 RXD (Orange) wire to the CASH-Interface2 #6 pin (ACTIVE LOW).
- Optional: Connect the VCC (Black) wire to the CASH-Interface2 +12V.
- Connect the GND (Red) wire to the CASH-Interface2 GND.
- Connect the EX Pulse (Purple) wire to the CASH-Interface2 INHIBIT, coin plug pin 6 or bill plug pin 9-12.

- For Nayax ONYX or VPOS TOUCH:
- Connect the AC/DC IN "+" (Red) wire to the CASH-Interface2 +12V DC.
- Connect the AC/DC IN "-" (Black) wire to the CASH-Interface2 GND.
- Connect the PULSE1 (Green) wire to the CASH-Interface2 #6 pin (ACTIVE LOW).
- Connect the EX Pulse (Purple) wire to the CASH-Interface2 INHIBIT, coin plug pin 6, or bill plug pin 9-12.

3. Configure the Nayax device settings: Log in to your Nayax account and access the Nayax web interface. Set up the Nayax device according to your requirements, including the credit per pulse, pulse active time, pulse inhibit, and pulse line welcome message. Refer to the Nayax web interface settings section in the user manual for detailed instructions.

4. Reboot the Nayax device: To activate the new settings, reboot the Nayax device. You can do this by sending a reboot command through the Nayax web interface or by disconnecting and reconnecting the power to the Nayax device.

Please note that these instructions are a general overview, and it is essential to refer to the specific wiring diagrams and instructions provided in the user manual for your Nayax device and the CASH-Interface2.