User Manual Q&AAnswer
Feb 01, 2025 - 02:56 AM
To install the ELVITA E118424 Exterior Wall Light, please follow the steps below:
1. Before starting the installation, make sure the power supply is turned off and the fitting has cooled down.
2. Wall mounted installation:
- Step 1: Prepare the mounting surface by ensuring it is clean and free from any debris.
- Step 2: Attach the mounting bracket to the wall using the provided screws and anchors.
- Step 3-1: Connect the wiring from the electrical supply to the wiring of the wall light. It is recommended to hire a licensed electrician for this step.
- Step 3-2: Secure the wiring connections using wire nuts or other appropriate connectors.
- Step 4: Attach the wall light fixture to the mounting bracket using the provided screws.
3. After completing the installation, switch on the power supply and examine the circuit to ensure everything is functioning properly.
Please note that the light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced. This luminaire contains 2 light sources of energy efficiency class E.
If you have any further questions or need assistance, you can contact ELON GROUP at +46(0)10-220 40 00 or visit their website at ELVITA.SE for support and service.
Add New Comment