User Manual Q&AAnswer
Feb 01, 2025 - 02:47 AM
To switch between wired and Bluetooth mode on the CIDOO V65 keyboard, you can use the following steps:
1. Wired Mode: When you plug in the USB cable, the keyboard will automatically switch to wired mode. The USB connection takes priority over Bluetooth.
2. Bluetooth Mode: To connect the keyboard to a Bluetooth-enabled device, follow these steps:
a. Power on the keyboard by switching it on (close to the USB port is OFF, reverse direction is ON).
b. Press and hold the FN key along with either the Z, X, or C key for 3-5 seconds until the corresponding key starts flashing.
c. Open the Bluetooth settings on your device and scan for available devices.
d. Locate and select the "CIDOO V65" entry.
e. Once the keyboard has connected to your device, the flashing key (Z, X, or C) will stop flashing, indicating successful Bluetooth pairing.
f. To switch between paired Bluetooth devices, simply short press the FN key along with the corresponding Z, X, or C key.
Note: If you want to disconnect from Bluetooth mode and switch back to wired mode, you can short press the FN key along with the Space key. When you plug in the USB cable, the keyboard will automatically switch to wired mode.
Add New Comment