User Manual Q&AAnswer
Feb 01, 2025 - 02:45 AM
To manually open or close the motorline Roll Up Rapid Door Spin, follow these steps:
1. Pull and hold down the unlock lever located on the motor.
2. Use a 6mm hexagon wrench to rotate the xxxx installed in the bottom of the engine.
3. Turning the xxxx to the right will open the door, and turning it to the left will close the door.
4. If desired, an umbrako keyed machine can be used to open the door faster.
Please note that this manual operation should only be done when necessary, and the power supply to the door should be turned off before performing any maintenance or manual operation.
Add New Comment