User Manual Q&AAnswer
Feb 01, 2025 - 02:31 AM
To connect the AIDA CCU-IP Professional Broadcast PTZ Joystick Controller to your cameras, you have three options: RS422 Connection, RS232 Connection, and RJ45 Connection. Here are the step-by-step instructions for each connection method:
1. RS422 Connection:
- Connect the RS422 cable from the controller to the first camera.
- Use the provided wiring guide to chain additional cameras together.
- Set the protocol, address, and baudrate for each camera using the controller's menu.
2. RS232 Connection:
- Connect the RS232 Visca cable (provided with the AIDA PTZ camera purchase) from the controller to the RS232 in port on the back of the camera.
- For additional cameras, use RS232 mini-din cables or CBL-RJ45 cables (purchased separately) for longer distances.
- Set the protocol, address, and baudrate for each camera using the controller's menu.
3. RJ45 Connection:
- Make sure the cameras and the CCU-IP controller are on the same switch.
- The controller has a default static IP address of 192.168.1.108. If you want to change it, enter the camera menu by pressing the SETUP button and adjust the network attributes.
- Add a network device on the controller by entering the camera's IP address, port (52381 by default), and selecting the Sony VISCA protocol.
- The LCD screen on the controller will indicate if the connection is successful.
Please refer to the installation guide for more detailed instructions and diagrams for each connection method.
Add New Comment