User Manual Q&AAnswer
Feb 01, 2025 - 02:30 AM
To assemble the SKILL ATTACK Volleyball Pitching Machine, follow these steps:
1. Start by unpacking all the components included in the package.
2. Identify the wooden base, poles, and Cube (main unit).
3. Attach the poles to the wooden base. You can use 2 or 3 poles depending on your preference.
4. Connect the USB cable provided. Plug the USB-C end into the Cube and the USB-A end into a USB3.0 port on your computer.
5. Once the Cube is powered, the LED indicator will start flashing. Wait until the LED is off before selecting the Cube as the camera in your video conference software.
6. Point the front arrow of the Cube towards the front of the meeting room where the display is usually located.
7. You can switch video modes by pressing the Mode button on the camera or using the buttons on the remote control. By default, the Cube starts in AI Dedicated Focus mode.
8. Long press the camera's " " button or short press the or button on the remote control to switch between AI mode and Manual Mode.
9. Press the camera's " " button or the " " button on the remote control to rotate through the available modes in AI mode and Manual mode.
10. In AI mode, you have Dedicated Focus, Auto-Framing, and Stage modes. In Manual mode, you have Conversation, 360° Panorama, and various preset viewing angles.
11. Make sure to allow sufficient response time when using the remote control, as the typical response time for commands is 1.6 seconds.
For more detailed instructions and illustrations, you can refer to the SKILL ATTACK Volleyball Pitching Machine Instruction Manual available for download on the FTI website: https://funtechinnovation.com/downloads/
Add New Comment