User Manual Q&AAnswer
Feb 01, 2025 - 02:24 AM
To attach a socket or accessory on the Milwaukee M18 Fuel Mid Torque Impact with Friction Ring or Pin Detent, follow these steps:
1. Ensure that you are using the appropriate size square drive socket for your application.
2. For the 1/2" Pin Detent model (Cat. No. 2962P-20), align the hole in the accessory with the detent pin on the anvil. Hold the detent pin in while pushing the socket onto the anvil. The detent pin will snap into place in the hole to secure the socket.
3. For the 3/8" and 1/2" Friction Ring models (Cat. No. 2960-20 and 2962-20), align the accessory with the anvil and push it firmly over the retaining ring. The friction ring will hold the socket in place.
To remove the socket or accessory, follow these steps:
1. For the 1/2" Pin Detent model (Cat. No. 2962P-20), insert a nail or other thin object into the hole in the accessory and press in the detent pin. This will release the socket from the anvil, allowing you to pull it off.
2. For the 3/8" and 1/2" Friction Ring models (Cat. No. 2960-20 and 2962-20), simply pull the accessory off the anvil.
Always ensure that you are using accessories specifically designed for use on impact wrenches, as using incompatible accessories may be hazardous.
Add New Comment