Answer

Feb 01, 2025 - 02:16 AM
To attach accessories, such as sockets, to the Milwaukee M18 Fuel Compact Impact Wrench, follow these steps:
1. For the 1/2" Pin Detent model (Cat. No. 2962P-20):
- Use only the appropriate size Square Drive Sockets.
- Align the hole in the accessory with the detent pin on the anvil.
- Hold the detent pin in while pushing the socket onto the anvil.
- The detent pin will snap into place in the hole to secure the socket.
2. For the 3/8" and 1/2" Friction Ring models (Cat. No. 2960-20 and 2962-20):
- Use only the appropriate size Square Drive Sockets.
- Align the accessory with the anvil and push it firmly over the retaining ring.
To remove the accessories, follow these steps:
1. For the 1/2" Pin Detent model (Cat. No. 2962P-20):
- Insert a nail or other thin object into the hole in the accessory.
- Press in the detent pin.
- Pull the accessory off the anvil.
2. For the 3/8" and 1/2" Friction Ring models (Cat. No. 2960-20 and 2962-20):
- Pull the accessory off the anvil.
Note: It is important to only use accessories specifically recommended for this tool. Using other sockets and accessories may be hazardous.
Add New Comment